Base Cabinets
Floor-standing frameless cabinets for kitchens, islands, bathrooms and utility rooms. Set each cabinet to your dimensions, then choose the drawers, fronts, case material and supports.
Live pricing is now available in your cart. Need something we don't list? Send us a sketch.
Base Cabinet 1762
Base with one external top drawer and one left-hinged door below, with interior shelving.
Base Cabinet 1765
Base with a left-hinged door and shelving on the left and one full-height pullout front on the right. The pullout is suitable for a separately specified trash bin; it is not a top drawer over a door.
Base Cabinet 1763
Base with one external top drawer and one right-hinged door below, with interior shelving.
Base Cabinet 1027
Single-front trash cabinet with an internal undermount rollout drawer above the trash space. Select and verify the bin and pullout hardware separately; the representative render does not establish a two-bin system.
Base Cabinet 1053
Base with a left-hinged door and shelving on the left and two stacked drawers on the right.
Base Cabinet 1056
Base cabinet with one door and two drawers, Equal Fronts (right hinged).
Base Cabinet 1202
Single door with hinge on the left side. has three internal rollout trays with recessed drawer glides
Base Cabinet 1009
Single door on right side and triple drawer on left side base cabinet. (right hand configuration)
Base Cabinet 1203
Single door on the right with three internal recessed pullout trays. Drawer glides are recessed into the side panels for a tighter appearance.
Base Cabinet 1768
Single door on left side and triple drawer on right side base cabinet. (left hand configuration)
Base Cabinet 1207
One external top drawer set by the top drawer height variable; left-hinged lower door with an offset partition and two internal rollouts.
Base Cabinet 1208
One external top drawer set by the top drawer height variable; right-hinged lower door with an offset partition and two internal rollouts.
Base Cabinet 1198
Integrated dishwasher front panel, not an appliance or storage cabinet. Set the article height to the typical base carcass height and verify its allowed width/depth and model-specific mounting.
Base Cabinet 1002
Cabinet with one full-height left-hinged door and shelving. No external or internal drawers.
Base Cabinet 1008
Single Drawer, with door below. Inside cabinet contains removable tray dividers made from back material, mounted on magic wire. (Hint: If you order with Height set to 20 3/4" or more, then the dividers will fit a standard LP Vinyl)
Base Cabinet 1003
Cabinet with one full-height right-hinged door and shelving. No external or internal drawers.
Base Cabinet 1026
Single Drawer Trash Bin (Compatible with HAFALE Hailo 502.77.532 (not tested), or similar. Bin optionally included with hardware)
Base Cabinet 1054
Right-hand front panel for an undercounter wine-cooler configuration. Confirm the selected appliance mounting details.
Base Cabinet 1024
Microwave housing with an upper appliance opening and one external drawer below. Appliance is not included; confirm model-specific fit.
Base Cabinet 1000
Base cabinet with two full-height doors and adjustable shelving. Door profile comes from the selected front configuration, not the article identity.
Base Cabinet 1766
Base with paired doors and shelving on the left and one full-height pullout front on the right.
Base Cabinet 2501
2 door cabinet. center section with single adjustable shelf. Doors left and right are 12"
Base Cabinet 1011
Double door and double drawer base cabinet with two doors below fixed shelf.
Base Cabinet 1201
Two Drawer internal Rollout Base cabinet. Double door with two internal drawers.
Base Cabinet 1767
Double door and double drawer base cabinet with doors and drawers. Includes adjustable shelves and partitions. Equal Fronts (left hand configuration)
Base Cabinet 1078
Double door and double drawer base cabinet with doors and drawers. Includes adjustable shelves and partitions. Equal Fronts (right hand configuration)
Base Cabinet 1769
Double door and triple drawer base cabinet. (Left hand configuration)
Base Cabinet 1012
Double door and triple drawer base cabinet. (Right hand configuration)
Base Cabinet 1701
6 Drawer base cabinet featuring one external drawer on the top, and 5 internal drawers (2 left and 3 right).
Base Cabinet 1065
Base with two vertically stacked drawers. The top front follows the top-drawer height setting; the lower front occupies the remaining height. The fronts are not necessarily equal.
Base Cabinet 1209
Top drawer set by the top drawer height variable, with one tall lower drawer for a separately selected trash bin. Bin and bin-specific hardware are not included.
Base Cabinet 1004
Three-door base with a double-door compartment on the left and a single-door compartment on the other side, separated by a vertical partition, with shelving.
Base Cabinet 1005
Three-door base with a double-door compartment on the right and a single-door compartment on the other side, separated by a vertical partition, with shelving.
Base Cabinet 1070
Base with three stacked drawers: one top front follows the top-drawer datum and the two lower fronts share the remaining height equally.
Base Cabinet 1006
Base cabinet with four doors, adjustable shelves, single partition
Base Cabinet 1007
Base with four stacked drawers. The upper three fronts are equal; the lower front occupies the remaining height. Not four equal fronts.
Base Cabinet 1072
Base with four stacked drawers. The top front follows the top-drawer datum and the three lower fronts share the remaining height equally.
Base Cabinet 1219
Base with four drawers: two side-by-side upper drawers above two full-width stacked lower drawers. The upper row follows the top-drawer datum.
Base Cabinet 1028
Base with five drawers: two side-by-side drawers in the top row and three full-width drawers below. The top row is controlled by the top-drawer height setting.
Base Cabinet 1029
Base with six drawers: two rows of paired side-by-side upper drawers and two full-width lower drawers. The two upper rows follow the top-drawer height setting.
Base Cabinet 1013
Open bookcase with shelving and no doors or drawers. Confirm the configured shelf count and support; the representative render is not a fixed shelf-count specification.
Base Cabinet 1220
Hafele Concepta III pocketing door cabinet. Includes the drillings on the door and side panel.
Base Cabinet 1223
Pantry with two Hafele Concepta pocketing doors, upper shelving, an internal work zone and two lower internal drawers. Stone counter is not included. Not a Sugatsune hardware specification.
Base Cabinet 1224
Pantry Cabinet with internal desk. Pocketing doors using Hafele Concepta III. Desk surface is programmed with same material as case. Front edge of desk has miter build up, which can be included with "assembly"
Base Cabinet 1225
Single Door Left Pantry Cabinet using Hafele Concepta pocketing system. Features internal counter at 36" made of case material. Suitable for undercounter appliance. For sizing, use appliance opening width +3 3/4". eg. 18" appliance opening would require a cabinet width of 21.75
Base Cabinet 1245
Concepta door cabinet designed to sit on top of a base cabinet. There is no bottom panel, as the bottom is intended to be stone (by others)
Base Cabinet 1246
Concepta Cabinet with no bottom panel. Designed to sit on top of a base cabinet with stone countertop (by others)
Base Cabinet 1250
Concepta double pocket-door cabinet with a centre partition, a fixed shelf and adjustable shelves; no bottom panel. Sits on top of a base cabinet with a stone countertop (by others).
Base Cabinet 1604
Blind corner base with a Hafele Magic Corner I pull-out, right swing, 16 in door opening, frame and two 295 mm front and two 390 mm back trays included
Base Cabinet 2401
Base cabinet for Rev A Shelf corner kidney tray - 24in
Base Cabinet 1048
Simple open-front case with no door or drawer hardware. Specify any required shelving separately; the representative native case contains no shelf.
Base Cabinet 1049
Case with a fixed blind front and no door or drawer connectors. Not an open-shelving cabinet or an operable door. Verify access and attachment for the intended use.
Base Cabinet 1016
Single door sink base cabinet with apron behind door. Apron height set by top drawer variable (Left hand)
Base Cabinet 1758
Sink base with one left-hinged door below a fixed blind front mounted with Button-fix. The blind front is not a tilt-out tray.
Base Cabinet 1770
Single door sink base cabinet with apron behind door. Apron height set by top drawer variable (Right hand)
Base Cabinet 1760
Sink base with one right-hinged door below a fixed blind front mounted with Button-fix. The blind front is not a tilt-out tray.
Base Cabinet 1761
Double-door sink base with a fixed apron above the doors. Apron height follows the top-drawer variable; the apron is not a drawer. No built-in trash pullout.
Base Cabinet 1759
Sink base with two doors below a fixed blind front mounted with Button-fix. The blind front is not a tilt-out tray.
Base Cabinet 1017
Sink base with a fixed upper blind front and two stacked drawer fronts below. Not a single-door sink base or a tilt-out tray. Verify plumbing clearance against the native drawer construction.
Base Cabinet 1074
Six-drawer base for selected shallow drop-in range appliances, with two false fronts at the top center. Fit is model-specific. As a reference, a 60-inch-wide case with 600 mm depth, 782 mm height, 19 mm panels and a 6-inch top-drawer-front setting provides a central construction bay approximately 28.50 inches W x 22.13 inches D x 6.12 inches H (724 x 562 x 155.4 mm), before required installation clearances. Available space changes with the cabinet configuration; overall cabinet width is not appliance opening width. Please inquire with the manufacturer, model number and installation drawing so we can confirm the opening, ventilation, service clearances and countertop requirements before ordering.
Vanity Cabinet 1665
Single Door Vanity with finished side panels. Side panels extend 7/8" (left)
Vanity Cabinet 1666
Single Door Vanity with finished side panels. Side panels extend 7/8" (right)
Vanity Cabinet 1646
Vanity with four doors in the side compartments and two stacked drawers in the center. Includes a 3-inch stretcher and 2-inch Button-fix side fillers. Not four drawers and two doors.
Choosing base cabinets
Base cabinets carry the countertop, so the range covers every way a run is built: door and shelf bases, drawer bases, sink bases with an apron or a fixed blind front, corner units, trash pull-outs, appliance housings and bathroom vanities.
Each model has its own width, height and depth range. Drawer fronts follow the top-drawer height you set, so a run of drawer and door bases lines up across the kitchen.
81 models on this page. Each card shows the width, height and depth range you can order.
How ordering works
Configure
Open a model, enter its dimensions and choose materials, drawers, fronts and hardware.
Check the price
Live pricing appears in your cart. Prices exclude taxes, duties and shipping.
Request a quote
Submit your cart and your quote and documentation are ready within minutes.
Production
Production typically takes 1 to 6 weeks. Local pick-up is the default; shipping is available on request.
Base Cabinets: common questions
What do Sealab base cabinets stand on?
Base cabinets can be ordered with Hafele Axilo leg levelers or set on a ladder-frame plinth from the parts range. A toe kick is a finish panel and does not support the cabinet.
Which drawer boxes can a base cabinet have?
Solid maple dovetail drawer boxes (Wooden 1/2" in the configurator), Blum LEGRABOX metal drawers with BLUMOTION soft close, or a blind front with no box behind it.
Can I order base cabinets assembled?
Cabinets are supplied as ready-to-assemble parts with machined joinery and pre-drilled holes, and assembly is also available.
Need something we don't list? Send us a sketch.