Cabinet Panels, Fillers & Parts

The pieces that finish a run: fillers, corner fillers, panels, surrounds, floating shelves and ladder-frame plinths.

16 of 16 cabinets
Fronts

Live pricing is now available in your cart. Need something we don't list? Send us a sketch.

Cabinet LP_CR_1567
Trim Cabinet 1567

Corner filler consisting of two front pieces meeting at the corner, with adjustable corner dimensions. Suitable for base or upper corner finishing; not a countertop support rail.

W6–48H3–96D6–48
Cabinet LP_DSP5SDE_1590
Trim Cabinet 1590

Five-sided hollow decorative assembly with an open underside.

W3–48H3–96D3–48
Cabinet LP_DSP6SDE_1591
Trim Cabinet 1591

Six-sided hollow decorative assembly, enclosed on all sides.

W3–48H3–96D3–48
Cabinet LP_FPL_1577
Trim Cabinet 1577

Left filler assembly with a front-material face and a case-material side return. The front mounts with a bumper gap or flush using Button-fix. Not a flat edgebanded strip.

W1.5–48H4–96D3–48
Cabinet LP_FPR_1578
Trim Cabinet 1578

Right filler assembly with a front-material face and a case-material side return. The front mounts with a bumper gap or flush using Button-fix. Not a flat edgebanded strip.

W1.5–48H4–96D3–48
Cabinet LP_FR_1585
Trim Cabinet 1585

Four-sided case-material surround with a continuous front lip and mitered visible corners. The lip reduces the clear opening. Not a flat vertical filler panel.

W10–96H10–96D4–48
Cabinet LP_FR_1586
Trim Cabinet 1586

Four-sided case-material surround with continuous front and back lips and mitered visible corners. Both lips reduce the clear opening. Not a flat vertical filler panel.

W10–96H10–96D4–48
Cabinet LP_FS_1576
Trim Cabinet 1576

Cantilever Floating Shelf. Consists of 1/4" sold wood edge with 3/4" plywood top and botttom. Minimum thickness of 2" to allow for steel shelf support. Steel shelf supports are not included and are typically installed into the framing behind the finished wall surface.

W10–96H2–4D3–24
Cabinet LP_GP_1562
Trim Cabinet 1562

Single horizontal case-material panel with optional edgebanding. Width and depth describe the panel face; height is its thickness. Suitable for a separately supported shelf or horizontal loose part.

W3–96H0–0D3–48
Cabinet LP_MPD_1575
Trim Cabinet 1575

Double miter panel with a front face and mitered returns on both sides. Used for a wrapped face or pier treatment; not a dishwasher mounting panel.

W1.5–48H12–96D2–48
Cabinet LP_MPL_1572
Trim Cabinet 1572

Miterpanel (left)

W1–48H1–96D1–48
Cabinet LP_MPR_1573
Trim Cabinet 1573

Miterpanel (right)

W1–48H1–96D1–48
Cabinet LP_PL_1571
Trim Cabinet 1571

Simple ladder frame plinth. screw connection.

W2–96H2–48D2–48
Cabinet LP_SP_1566
Trim Cabinet 1566

Loose front-only part matching the selected door/drawer-front construction. No carcass or appliance mounting qualification is included.

W2–48H3–96D0–0
Cabinet LP_SRP_1584
Trim Cabinet 1584

Three-sided miter-frame surround panel with a programmable lip on the front edge only. Designed to wrap cabinet sides or bases, the front lip depth is adjustable while the back remains flush. The lip face is mitered for seamless alignment, and the left and right returns employ overlay joints for straightforward assembly. The inside clear dimension equals the overall size of the surround minus the programmed lip depth.

W10–96H10–96D4–48
Cabinet LP_SRP_1587
Trim Cabinet 1587

Three-sided miter-frame surround panel with programmable lips on the front and back. Lip faces are mitered, side returns use overlay joints, and the inside clear dimension equals the overall size minus both lip depths.

W10–96H10–96D1.5–48

Choosing cabinet panels, fillers & parts

Fillers close the gap to a wall, with a front-material face and a case-material side return. Panels, surrounds and floating shelves finish exposed ends and open spaces, and a ladder-frame plywood plinth can support a run of floor cabinets instead of leg levelers.

Each part is set to the size you need within its range, from the same CNC process as the cabinets.

16 models on this page. Each card shows the width, height and depth range you can order.

How ordering works

  1. Configure

    Open a model, enter its dimensions and choose materials, drawers, fronts and hardware.

  2. Check the price

    Live pricing appears in your cart. Prices exclude taxes, duties and shipping.

  3. Request a quote

    Submit your cart and your quote and documentation are ready within minutes.

  4. Production

    Production typically takes 1 to 6 weeks. Local pick-up is the default; shipping is available on request.

Cabinet Panels, Fillers & Parts: common questions

What is a filler panel for?

A filler closes the gap between a cabinet and a wall or another obstruction. Sealab fillers have a front-material face and a case-material side return.

Can I support base cabinets on a plinth?

Yes. A ladder-frame plywood plinth can span several floor cabinets, as an alternative to leg levelers.

Need something we don't list? Send us a sketch.

More from the catalog